Dingo® TX 427 Wide Track
The Toro® Dingo® TX 427 Wide Track extends your versatility, while improving your productivity when faced with a variety of landscapes and ground conditions.
- 27 HP (18.6 kW) CH 740 Kohler Command Pro Series
- 42″ wide with bucket
- Turf friendly at only 2075 pounds
- Patented easy-to-use traction control system
The TX 427 Wide Track offers amazing hydraulic power and with only 3.6 psi ground pressure, the Dingo TX 427 is extremely gentle on delicate turf. All of this awesome power is harnessed with only 3 easy-to-use hand controls. These simple controls coupled with walk behind operator position translate into extremely short learning curves, 360° visibility and instant productivity.
Simple Controls
You’re up and running in a flash with three easy-to-use controls. 1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms – all with one hand. 2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3) The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly.
Exclusive TX Track Drive
Low center of gravity and large footprint on the Dingo TX 427 increase stability on side hills and provide smooth operation over rugged terrain; eliminates tire ruts and flat tires.
4-Pump Hydraulic System
4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it!
Compact Size
Narrow enough so you can bring hydraulic power to tight areas; through doorways and gates previously accessible only by manual labor. Plus it provides zero radius turn capability for unmatched maneuverability.
Air-Cooled Gasoline Engine
A 27 hp (20 kw) Kohler® engine provides the necessary power to drive any one of the multitude of Toro attachments available for the Dingo TX.
Reinforced Tracks
Durable Kevlar reinforced tracks offer extended life, unlike competitive units with metal inserts. Open design of tracks offers self cleaning, preventing the collection of sand, rock, mud, and debris that could jam tracks.
Specifications
Cooling System
Air Cooled
Flow
11.4 gpm (43.2 lpm)
Ground Speed
0-4.5 mph (0-7.2 km/h) / 0-2.0 mph (0-3.2 km/h)
Hinge Pin Height
65.8″ (167.1 cm)
Length
92″ (233.7 cm) w/bucket; 70.7″ (180 cm) w/o bucket
Operating Capacity
535 lbs. (243 kg)
Tip Capacity
1,530 lbs. (694 kg)
Warranty
Product – One Year* / Engine – Three Year*
Width
41″ (104 cm)
Engine
25 HP (18.6 kW) Kohler Command Pro Series CH 740
Ground Clearance
4.6″ (11.7 cm)
Height
46.1″ (117.1 cm)
Hydraulic System Pressure
3,000 PSI
Loader Hydraulic System
Joystick control for all funct
Reservoir Capacity
10.5 gallons (40 liters)
Track
96.6″ x 9.5″ (245 cm x 24 cm)
Weight
1,990 lbs (902 kg)
Disclaimer
*See your local dealer for warranty details.
Compact Utility Loader Attachments
From earth moving, tilling and trenching to leveling, lifting, hauling and demolishing, all Toro Dingo models can be equipped with over 35 attachments to handle and endless amount of tasks.
See them all here:
Aggressive Tread Tracks
Make those difficult job site conditions easier to maneuver with this aggressive track option.
Ride-On Platform
Quickly and easily bolted on to any Toro Dingo TX model (except TX 413), this ride-on platform helps minimize operator fatigue – especially in applications requiring a lot of hauling and covering substantial distances.
Additional information.
Dingo Light Kit
Make night and dark work places, shine.
DINGO® TX 427 Wide Track
Serial:
22322
