Two Locations

Knoxville

865-982-6452

Tri-Cities

423-975-9111

Operating Hours

Parts & Service

M-F 7am - 5pm

Sales & Rentals

M-F 8am - 5pm

Contact Us

865-982-6452

Sales: Blake Wilson

Parts/Service: Terry Nichols

Motor Graders – CASE Series C & B

CASE motor graders have it all. Smooth operation, auto shifting and creep mode for finish grading. Experience extreme, constant traction with the hydraulic differential lock and automatic power splitting.

Series C

FLOW AT YOUR FINGERTIP

The new CASE C Series grader brings incredible precision to the market with its hydraulic circuit. With highly responsive and precise controls, the load sensing hydraulics make any operation easy and smooth. A directly activated axial piston pump delivers only the required amount of oil where it is needed, avoiding power waste. The control valves provide pressure compensation enabling the moldboard to be lifted or lowered in parallel. A dedicated switch installed on the cab floor allows the operator to obtain maximum output from the hydraulic circuit, independently from the engine revolutions, for faster reactions (Full Flow Mode).

BANNING POWER WASTE, SPINNING PRODUCTIVITY

The exclusive hydraulic block, directly controlled, reduces any lever free play over the entire grader life. Meanwhile, the operator can benefit from a direct feed-back of the hydraulic system increasing the working accuracy. The float function, available as an option, lets the oil flow unobstructed in the cylinders to let the moldboard naturally follow the ground contour. This exclusive hydraulic system has been conceived to provide unbeatable performance, fuel saving, reliability and grader controllability.

FLEXIBLE PERFORMANCE

The CASE C Series grader can be equipped from factory with optional Machine Control ready system, which allows easy integration of any preferred precision equipment supplier. The unit is delivered to the customer with all the sensors, cables and supports. It’s a real “plug and play” solution; the customer just has to install the antenna and the monitor on the cab and the blade control is ready to work. The system is compatible with different types of controls: Sonic, Laser, GPS or Universal Total Station. The automatic blade control allows operators to get a considerable working capacity from the CASE grader. This helps to get the job done faster, with fewer rounds and always the right amount of material moved. Consequently, there’s greater cost effectiveness in terms of operation and working time. The CASE machine control option allows customers to use blade control devices already installed in other construction units of its fleet, making the return on investment more immediate.

Series B

MASSIVE CAB, MASSIVE COMFORT

At more than 76 inches tall, the B Series motor graders boast a spacious cab, giving operators plenty of room to stand, move, see and work. The ROPS/FOPS-certified Iso-mount cab also helps minimize noise and vibration for a quiet, comfortable ride. Coupled with the optional deluxe suspension seat with lumbar control, you’ll feel less fatigued and more productive throughout the day.

THE ALL-WHEEL DRIVE ADVANTAGE

All-wheel drive (AWD) models deliver incredible responsiveness, improved steering and greater draft control in tricky underfoot conditions such as mud, sand, snow and banks – crucial for faster snow removal and greater performance in ditching or heavy blading applications.

STABILITY STARTS WITH AN A-FRAME

A stout A-frame drawbar offers outstanding stability, thanks to the heavy-duty boxed frame design. Its wide stance supports the industry’s largest circle, which is engineered for greater efficiency, requiring less power when turning the circle. Together, their high-strength design provides maximum durability and component life.

SMART, EXTERNALLY DRIVEN CIRCLE TEETH

Unlike others, CASE motor graders are designed with external circle teeth. This self-cleaning, large tooth design provides more contact area to deliver greater leverage when turning the blade under load. And should you hit an obstacle with the blade, the CASE circle pulls away from the drive gear instead of towards it, which can bind it. So there’s no need for slip clutches or shear pins.

SHOCK-ABSORBING CIRCLE SAVERS

Optional anti-shock accumulators protect circle components by allowing the moldboard to move over obstructions and then return to its original position – no adjustment or operator intervention necessary.

Series C

836C

Engine Power
138 hp | 102 kW
Operating Weight
26,466 lb | 12,005 kg

836C AWD

Engine Power
138 hp | 102 kW
Operating Weight
27,128 lb | 12,305 kg

856C

Engine Power
173 hp | 129 kW
Operating Weight
33,966 lb | 15,407 kg

856C AWD

Engine Power
173 hp | 129 kW
Operating Weight
38,848 lb | 15,807 kg

Series B

865B

Engine Power
193 hp | 144 kW
Operating Weight
33,797 lb | 15,330 kg

865B AWD

Engine Power
193 hp | 144 kW
Operating Weight
35,274 lb | 16,000 kg

885B

Engine Power
220 hp | 164 kW
Operating Weight
39,771 lb | 18,040 kg

885B AWD

Engine Power
220 hp | 164 kW
Operating Weight
42,198 lb | 18,124 kg
Motor Graders Brochure

Call Now!

Knoxville
865-982-6452
Tri-Cities
423-975-911160

Contact Us for Details

Series C Features

  • Exclusive Front Articulation
  • Externally Driven Circle Teeth
  • All-Wheel Drive with Creep Mode
  • Spacious Cab
  • Protected by ProCare
  • Optional Machine Control Ready for Leica, Topcon and Trimble

Series B Features

  • Unique Multi-Radius Involuted Moldboard
  • Exclusive Front Articulation
  • Externally Driven Circle Teeth
  • All-Wheel Drive with Creep Mode
  • Spacious Cab
  • Protected by ProCare

Support Comes Standard

  • Protected by ProCare™
  • 1-year/unlimited hours full coverage base limited warranty
  • 2-years/2,000 hours extended limited engine warranty
  • 3-years advanced SiteWatch™ subscription with ProCare™
  • Genuine CASE parts & expert service
  • Better parts availability & faster deliveries
  • CMI has exclusive access to the Electronic Service Tool (EST) that quickly pinpoints machine issues.
  • Specialized finance programs & flexible leasing packages

CASE SiteWatch Logo

SiteWatch™ telematics breaks the boundaries of fleet management by allowing you to monitor and manage multiple machines from your computer, wherever you may be. No more manually tracking down engine hours and fuel levels. Get real time performance metrics, idle-time analytics, scheduled maintenance intervals and programmable security alerts sent to any computer, anytime, anywhere.

RELATED EQUIPMENT

  • CASE 590 Super N Backhoe Loader
    Backhoe Loaders
  • CASE 1650M Crawler Dozer
    Crawler Dozers
  • CASE 586H Forklift
    Forklifts
  • CASE TR270 Compact Track Loader
    Compact Track Loaders
  • CASE 321F Compact Wheel Loader
    Excavators - Mini
  • CASE SR210 Skid Steer Loader
    Skid Steer Loaders
  • CASE CX250D FULL SIZE EXCAVATOR
    Excavators - Full Size
  • CASE 321F Compact Wheel Loader
    Compact Wheel Loaders
  • CASE CX75SR Midi Excavator
    Excavators - Midi
  • CASE 921G Wheel Loader
    Wheel Loaders - Full Size
  • CASE SDV45D Asphalt Compactor
    Compactors